Dots

Digital thermometers battery operation / Marine version

Type CargoTemp Roller ETC

  • Good readability of the process parameters. Large and high-contrast LCD
  • Oil and temperature resistant FEP connection cable
  • With 6 markings every 5 meters for depth indication, tension up to 50 N
  • Can be used in EMC-critical applications

Configure product

Measuring range
Description

The digital thermometers of the CargoTemp product series work with a discrete-time measuring method. The cycle time of the measurement starts from 3 sec, so that the operator can read the current measured value in passing.

The DiTemp has an easy-to-read LCD-based display.

The instruments of the DiTemp series have a robust mechanical construction and are designed for industrial use as well as for use under difficult environmental conditions. The immunity to electromagnetic interference complies with the requirements of the applicable industry standards.

After start-up, the instrument performs an internal self-test, checking the functionality of the connected sensor as well. Automatic diagnostic routines in the microprocessor permanently monitor the sensor signal for plausibility and can thus signal a sensor break via the display unit. The results are displayed as a message.

Data sheet

Request a quote

Request your personal offer for the product you have configured here. If you have any further questions, please do not hesitate to contact us. You will find your personal contact person here.